The cause of a leaking tap in your home could be a very minor issue, or it might be a sign of some major, systemic plumbing problems. This is why it’s important you have a professional plumber out to assess the leak.

With our years of industry experience, we’ve seen all the causes of leaking taps you can think of, including:

• Damaged or corroded tap washer
• Improperly installed tapware
• Damaged or loose O-ring
• Old or damaged cartridge
• Mineral buildup or damage from use on the valve seat
• Loose tapware parts
• Water pressure over 500 kPa
• Damaged or corroded pipes
• General wear and tear due to age

Some types of taps are prone to leaks more than others. Our plumbers will inspect your tap to find the cause of the leak and suggest the most appropriate ways to fix it.

This could include regreasing and reseating the spindle threads or replacing the tap washer and O-rings. More major problems like excessive water pressure could mean you need a pressure limiting valve installed, or heavily corroded pipes might need relining or replacing.

Sometimes a tap might be beyond repair. Replacing it with new tapware could be more cost-effective. New taps can also give your laundry, kitchen or bathroom a much-needed facelift.

If you’re dealing with a pesky dripping tap, you might be wondering: “What do I need to fix this annoying leaking tap?”

If you’re not confident with a DIY repair, call the leaking tap experts at EPlumber.

But if you’re prepared to make a quick trip to the local hardware store, fixing a leaking tap can be simpler than you might think.

Here’s a quick rundown of the essential tools and materials you’ll need:

• Adjustable wrench (or shifting wrench): This handy tool will help you loosen and remove the tap handle and other components.
• Replacement parts: Identify the specific parts that need replacing. It could be worn-out washers, O-ring, or cartridge, depending on your tap type. Make sure you purchase the correct replacements and everything is the correct size.
• Screwdriver: You might need a screwdriver to remove screws holding parts of the tap together.
• Needle nose pliers: These pliers may be needed for the more delicate work.
• Plumber’s tape: Also known as Teflon tape or threat seal tape, this helps create a tight seal when reassembling the tap. Gaffer tape and a resealing kit may also come in handy.
• Bucket and towels: Have these on hand to catch any excess water and to keep your workspace dry.
• Safety glasses: It’s always a good idea to protect your eyes while working on plumbing.
• Pen and paper: Take notes and make sketches as you disassemble the tap to ensure you can put it back together correctly.
• Patience: Most importantly, bring a little patience to the job. Take your time, follow instructions carefully, and don’t rush the process.

With all the correct tools in your toolkit and a bit of DIY spirit, you’ll be well-prepared to tackle that annoying leak and enjoy a drip-free tap in no time. But if you replace the washer with a new washer and the tap is still leaking, it’s time to call a qualified plumber from EPlumber.

Don’t worry – you don’t have to be a plumbing expert to tackle this common household issue. However, if you’re not confident in a DIY fix, call a professional from EPlumber. You don’t want to end up with a giant mess.

You may know what a washer and jumper valves look like, but that doesn’t make DIY repairs an easy exercise.

Here’s a simple step-by-step guide on how a qualified plumber will fix a leaking tap:

• Turn off the water supply: First things first, shut off the main water supply to the tap you’re working on. You’ll usually find a valve beneath the sink or near the tap itself. Turn it clockwise until it’s fully closed to stop the water flow.
• Remove the tap handle: Use a screwdriver or an adjustable wrench to carefully remove the handle of the tap. There might be a screw or a cap or a cover plate that needs to be taken off first. Keep the parts in order so you can easily reassemble them later.
• Access the cartridge or washer: Depending on your tap body type, you’ll either find a cartridge or a washer. Inspect these components for wear and tear. If you see any damage, it’s time for a replacement. Use a rubber washer if required.
• Replace the faulty parts: Head to your local hardware store to pick up a new cartridge or washer that matches your tap model. Install the new part in place of the old, following the manufacturer’s instructions.
• Reassemble and test: Carefully put the tap handle back on, ensuring everything aligns correctly. Turn on the water supply and test your tap to make sure the leak is gone. Make sure the tap turns on easily. If it’s still dripping, you may need to double-check your work or seek professional assistance.

Fixing a leaking tap can be an easy DIY task but sometimes it isn’t that simple. Dripping taps can be covering more serious problems.

We can share a sneaky tip or two on fixing a leaky faucet, but there’s no substitute for training and experience. Most taps might seem easy to fix but when you need that extra plumbing help, make sure you call the qualified professionals at EPlumber.

Don’t wait until your water bill increases to get leaking tap repairs. EPlumber has plumbers available today to fix a leaking tap.

EPlumber vans are fully stocked with common tools, parts and even some taps so we can fix a leaking tap then and there. We don’t need to run to the shops to buy the parts we need. If there’s a specific tap you’d like, we can source that for you too.

Our team is available 24 hours a day, 7 days a week, so we can work around your busy schedule. Our prices are the same no matter what day or time you need us. There’s no need to take time off work for a leaking tap repair when EPlumber can save the day, night or public holiday.